Creality K2 Plus Combo

• K2 Plus Combo 3D Printer

  Printing Technology: Fused Deposition Modeling

  Build Volume: 350*350*350mm

  K2 Plus Dimensions: 495*515*640mm

  K2 Plus Combo Dimensions: 495*515*916mm

  K2 Plus Net Weight: 35Kg

  Printing Speed: <600mm/s

  Acceleration: 30000mm/s²

  Printing Accuracy: 100mm±0.1mm

  Layer Height: 0.05-0.3mm

  Extruder: Dual-gear direct drive extruder

  Filament Diameter: 1.75mm

  Nozzle Diameter: 4mm

  Nozzle Temperature: ≤350°C

  Heatbed Temperature: ≤120°C

  Chamber Temperature: ≤60°C

  Build Plate: Flexible build plate

  Leveling Mode: Full-auto Leveling

  XYZE Motor: Servo-step motor

  File Transfer: USB Drive/Ethernet/WiFi

  File Storage: 32GB EMMC

  Wifi: 2.4GHz/5GHz

  RFID Sensor in Printer: Included

  Rated Voltage: 100-240V~ AC 50/60Hz

  Display Screen: 4.3" color touch screen

  Rated Power: 1200W

  Supported Filaments: PLA/ABS/PETG/PA-CF/ PLA-CF/ PET/ASA/PPA-CF

  Al Camera for Monitoring: Standard

  Al Camera for Monitoring: Standard

  Power Loss Recovery: Yes

  Auto Filament Relay: Yes

  Filament Tangle Detection: Yes

  Air Purifier: Yes

  Input Shaping: Yes

  Lighting kit: Yes

  Active Bed Tilt Calibration: Yes

  Active Belt Tensioning: Yes

  Active Chamber Heater: Yes

  RFID-tagged Filaments: Yes

  Printable File Format: Gcode/3MF

  CFS Compatibility: Yes

Active Belt Tensioning

Timing belts may get loose over time, leading to poor printquality and accuracy. On the K2 Plus, the belt tension is checked and rigged actively by a pressure sensor instead of marhually Now, belt tensioning is a thing you can forget about.

Incredibly Quiet While Printing Hard

The working noise of K2 Plus is only 45dB, which is credited tothe virtue of step-servo motors, dynamically balanced fans, and a snug enclosure It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to.

Blazing Speed, a New Record

For a large-format machine, 600mm/s is pretty fast, but that's not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s²*.

40mm³/s High-flow Hotend

Powered by an 80W heater, the flow rate of ABS at 280℃ can reach 40mm³/s*, 66% higher than the previous design.

Chamber AI Camera Keeps a Keen Watch

K2 Plus uses an Al camera on the chamber side to watch over spaghetti failure, foreign objects, idling, etc. It will alert you when an error occurs. It also supports real-time monitoring and time-lapse filming.

Ingenious Anti-tilt Auto Leveling

K2 Plus features dual independently motorized Z-axes for automatic tilt reduction, strain gauge-based auto-leveling compensation, and a pro-level first layer capability that ensures a smooth and neat initial layer without manual intervention.